Tripp Lite SMART1200XLHG 1000VA Line-Interactive UPS — Network Hardwares Skip to content
Tripp Lite Smart Tower UPS 120V 1000VA 750W Hospital Medical Grade USB DB9 (SMART1200XLHG) Main image

Tripp Lite SMART1200XLHG 1000VA Line-Interactive UPS

by Tripp Lite
Availability:
in stock, ready to be shipped
$892.90 - $892.90
$892.90
$892.90 - $892.90
$892.90

FREE SHIPPING

Delivery time

We ship orders 24-48 hours after they have been placed. We do not charge before we ship them out. It might take up to an additional 48 hours to ship international orders.

Carbon-neutral shipping with Shopify Planet
All deliveries are carbon neutral
Powered by Shopify Planet

Tripp Lite SMART1200XLHG

Tripp Lite SMART1200XLHG 1000VA Line-Interactive UPS system provides dependable battery backup. It is fully compliant with UL 60601-1 regulation when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities.

The 1kVA/750W capacity provides up to 28 minutes of runtime for a half load or 10 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V to average 120V nominal output without drawing battery power.

The SMART1200XLHG's built-in isolation transformer with Faraday shield offers total isolation and removes common mode noise while maintaining complete AC surge suppression in all modes.

This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA 5-15P-HG plug with a 6 ft. cord for flexibility in placement. All four outlets provide backup and surge protection, rated to 480 joules.

The SMART1200XLHG also features diagnostic LEDs, a USB port, and a DB9 serial port that work with Tripp Lite's included PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure.

Tripp Lite SMART1200XLHG Tech Specs

General Information
Manufacturer:Tripp Lite by Eaton
Manufacturer Part Number:SMART1200XLHG
Brand Name:Tripp Lite
Product Line:SmartPro
Product Name:SmartPro 1200XLHG UPS
Product Type:Line-interactive UPS
Technical Information
Plug/Connector Type:NEMA 5-15P
Receptacle Type:NEMA 5-15R
Receptacle Detail:4 x NEMA 5-15R
Cord Length:6 ft
Transfer Time:4 ms
Power Description
Load Capacity:1000 VA/750 W
Input Voltage:120 V AC
Output Voltage:115 V AC
120 V AC
Management
Network Management:SNMP Manageable
Alarm:On Battery
Overload
Low Battery
Controls/Indicators
Status Indicators:Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Interfaces/Ports
USB:Yes
Battery Information
Battery Chemistry:Lead Acid
Backup/Run Time (Full Load):10 Minute
Backup/Run Time (Half Load):28 Minute
Battery Life:6 Year
Typical Battery Recharge Time:4 Hour
Hot Swappable:Yes
Environmental Conditions
Maximum Operating Temperature:104°F (40°C)
Physical Characteristics
Height:12.8"
Width:7.5"
Depth:9"
Form Factor:Tower
Weight (Approximate):44.60 lb
Miscellaneous
Package Contents:
  • SmartPro 1200XLHG UPS
  • SMART 1200XLHG Medical Grade Tower UPS System
  • PowerAlert Software and cabling
  • Warranty information
  • Instruction manual
Additional Information:
  • Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
  • Maintains less than 300 microamps leakage current for UPS and all connected equipment
  • Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
  • Provides connected equipment with continuous power during short and long duration loss of commercial power
  • Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
  • Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
  • Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
  • Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
  • Resistant to electrostatic discharge
  • Supports loads up to 1000VA / 750 watts
  • 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
  • 4 protected hospital-grade outlets; 6-ft. cord
  • 1-RS-232 and 1-USB serial port for network interface; SNMP compatible
  • SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
  • Complete surge protection, line isolation and EMI/RFI noise filtering
  • 2 year product warranty
  • PowerAlert unattended shutdown software and complete cabling included
  • 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
  • Battery replacement door
  • Back panel grounding lug
Certifications & Standards:UL1778 (USA, Series AGSM1200PSR3HG), UL2601-1 (Medical), cUL (Canada), FCC Class A (emissions), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin:Taiwan
Warranty
Limited Warranty:2 Year

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare