FX ECX 4U Patch Panel Housing. Holds 12 ECX adapter frames or cassettes.

1U Copper/Fiber Enclosure Adds Up to 4 High-Density Cassettes to Your Rack InstallationInsert up to four Tripp Lite N484-Series copper and/or fiber cassettes (sold separately) into this cost-effective enclosure panel. Mounting in just 1U of space in an EIA-standard 19-inch rack, the compact N484-01U-MINI includes no protruding front door or rear cable management, which allows more inside rack space. It is ideal for a wide range of singlemode and multimode applications in small and medium enterprise environments where equipment is connected in up to three adjacent racks. The fully passive mini panel adds no heat or cooling load. Easily Accommodates a Variety of Cassette TypesThe heavy-duty steel N484-01U-MINI houses as many as four N484-Series cassettes, including RJ45 and SFP+ copper and LC duplex and MTP/MPO fiber, and 48 ports within its 1U chassis. In the case of fiber cassettes, the panel lets you interconnect any combination of 10 Gb, 40 Gb and 100/120 Gb network equipment in a simple, elegant and highly flexible way. It seamlessly connects to your existing cabling infrastructure and supports a wide range of applications and protocols in high-density telecom and data center environments. Typical ApplicationsConnect, organize and manage copper and fiber optic cable connections in your high-density telecom or data center environment

The N492-WM2-BK Wall-Mount Fiber Optic Distribution Enclosure manages and protects your fiber terminations where space is at a premium. Two doors, each with its own lock, open to reveal plenty of room for splicing and patching your fiber cabling. It supports up to two fiber adapter panels, such as Tripp Lite's LC (N492-08D-LC), SC (N492-06D-SC) and ST (N492-08S-ST) panels. Cable manager rings, cable ties and a labeling sticker help you keep your cables neatly organized inside the fully sealed enclosure. Made from heavy-duty cold-rolled steel, the N492-WM2-BK mounts on any solid surface. Features Fully Sealed Enclosure Manages and Protects Your Fiber Terminations Dual individually locking doors provide extra security Mounts securely on any solid surface Heavy-duty cold-rolled steel construction Includes cable manager rings, cable ties and label for organized cable management Supports up to 2 Tripp Lite fiber adapter panels, including N492-08D-LC, N492-06D-SC and N492-08S-ST

The N492-WM4-BK Wall-Mount Fiber Optic Distribution Enclosure manages and protects your fiber terminations where space is at a premium. Two doors, each with its own lock, open to reveal plenty of room for splicing and patching your fiber cabling. It supports up to four fiber adapter panels, such as Tripp Lite's high-density LC (N492-08D-LC), SC (N492-06D-SC) and ST (N492-08S-ST) panels. Cable manager rings, cable ties and a labeling sticker help you keep your cables neatly organized inside the fully sealed enclosure. Made from heavy-duty cold-rolled steel, the N492-WM4-BK mounts on any solid surface. Features Fully Sealed Enclosure Manages and Protects Your Fiber Terminations Patch and splice cabling in a single enclosure Mounts securely on any solid surface Dual individually locking doors provide extra security Heavy-duty cold-rolled steel construction Cable manager rings, cable ties and label included for organized cable management Supports up to 4 Tripp Lite fiber adapter panels, including N492-08D-LC, N492-06D-SC and N492-08S-ST

The N482-00U High-Density Fiber Cassette Sleeve is a cost-effective solution for adding a single N482-Series fiber cassette to your network application without buying a chassis. Made of heavy-duty cold-rolled steel, this space-saving 0U sleeve mounts to the metal surface of your EIA-standard 19-inch rack or cable manager via two attached magnets.The N482-00U is recommended for adding an extra cassette to a rack application without the expense of a new 1U chassis, as well as adding fiber connectivity where no existing rack infrastructure exists, such as a remote workstation, new build-out or temporary install location. It reduces cable clutter by allowing you to connect cables at the cable manager through which they are being routed.The N482-00U accommodates Tripp Lite N482-Series cassettes, including LC and MTP/MPO connector types. It allows you to connect 10 GbE, 40 GbE and 100/120 GbE network equipment with elegance, ease and little cost. The fully passive sleeve adds no heat or cooling load.Features Cost-Effective, Space-Saving Solution for Adding a Fiber Cassette to Your System Holds a single Tripp Lite N482-Series fiber cassette Attaches to metal rack enclosures and cable managers with included magnets Expands an installation without purchasing a new 1U chassis Adds network connectivity to areas without existing infrastructure Ideal for connecting 10 GbE, 40 GbE and 100/120 GbE network equipment Connects cables at cable manager through which they're being routed Fully passive with no added heat or cooling load Made from heavy-duty cold-rolled steel

Panels are recessed horizontally. Splice tray stud enables you to install pigtail splice strays. Compact and rugged enough for commercial applications. Corrosion-resistant powder coating finish. Constructed of 16-gauge steel housing. Features (2) fiber Kevlar® clamps to hold the fiber in place coming into the box. With this shelf, you can organize and protect fiber connections and splice trays in your 19" or 23" rackmount fiber applications. This shelf is particularly useful in cabinets and racks where little space is available. It accepts three snap-in Adapter Panels or MPO Cassettes for connections. The cable punchouts are aligned for easy stacking of shelves. Plus, fiber Kevlar clamps on the outside rear hold the fiber in place as it enters the box. The adapter panels are recessed horizontally in the swing-out tray for superior patch cord protection. A splice tray stud enables you to install pigtail splice trays. The Rackmount Fiber Shelf comes with rackmount brackets that are adjustable for mounting in cabinets and two-post racks. They're set for 19" racks but can be reversed for use in 23" racks.